Combining Report Filters

Introduction

The following section explains how to combine multiple report filters and apply them to a single report.. Before you can combine multiple filters, you need to create and define each filter

Combining report filters in a single report

To combine multiple report filters in a single report:

1. Make sure you are in Edit mode and verify you are on the Report Filters tab.
   If the Report Filters tab is not visible, check the More report options checkbox.
   A document can contain multiple reports. The name of the selected report appears in the Current report drop-down list box.

2. Leave the displayed report selected.
   Or
   Select a different report by clicking the arrow next to the Current report drop-down list box, and then select a different report from the list.

3. Create the individual report filters.
   By default, WebIntelligence combines the filters with the And operator. You can leave the And operator or change it to Or. The table below explains the difference between the And and Or operators:
   
   To change the operator, click the arrow next to the drop-down list box displayed in the Report Filters pane.
   
   The operator changes.
   

4. Click Run, if you are generating the results for the first time.
   Or
   Click Apply, if you have already generated the results once.
   WebIntelligence applies the new operator to combine the filters and displays the appropriate results on the report.